SIP SPECIFICATION

Our standard SIP packages offer you a simple and straightforward way of proceeding with your building project. As well as a supply only option our team can install your SIP kit to 'wind and weathertight'.  We also provide a joinery pack, delivered to suit your build programme.  Additionally we have created kitchen and bathrooms packs specifically designed and detailed for each house. With our affiliated contractors we can now deliver a 'turnkey' service for those who want all the hassle removed.  For the ultimate finish to your house we can fully furnish and dress your house to an exceptionally high standard.

Supply

Our Supply package includes the following materials:

150mm thick SIP external wall panels

150mm thick SIP external roof panels

89mm and 150mm thick internal walls

OSB full face internally for fit out

OSB full face externally for ties and battens

Soleplate with DPM

Edge timbers

All structural timber/steel posts, beams, and purlins

Silicone and foam for site sealing

Glidvale Protect 200 Façade or equal (walls)

Glidvale Protect VP400 or equal (roof)

Glidevale Protect VC Foil Ultra

Nordan NTech 1.2 windows and external doors

Nitesco expanding foam sealant for window installation

 

We will provide:

Structural engineering calculations (applies to kit only so you will also require your own engineer to provide S.E.R.)

Working drawings

Sole plate fixings

All panel and timber fixings

 

Package excludes:

Fire stops

Finishings

Ceilings

Decking

Delivery (will be charged at cost to client)

 

Site conditions required:

Site and all roads to the site are to be suitable for use by a 15m trailer and tract or unit. A hardstanding is to be formed on site using blinded hardcore suitable to carry an axle load of 14.00 tonnes for the offloading and storage of panels and insulation. The location and size of this hardstanding will be assessed on an individual basis.

 

A perimeter of 3m around the whole structure base is to formed using blinded hardcore suitable to carry an axil load of 5.00 tonnes. The site area relating to the erection of the structure is to be clear of all building materials and plant used during the construction of the substructure.  All perimeter foundation trenches are to be filled. There must be sufficient laydown area sufficient for the kit adjacent to the slab.

 

Concrete / block / timber base levelled to within 10mm

 

An option with a cassette floor is available.

Supply+Erect

Our Erect package includes supply and delivery to site and erection to 'wind and weathertight' of:

150mm thick SIP external wall panels

150mm thick SIP external roof panels

89mm and 150mm thick internal walls

OSB full face internally for fit out

OSB full face externally for ties and battens

Soleplate with DPM

Edge timbers

All structural timber/steel posts, beams, and purlins

Silicone and foam for site sealing

Glidvale Protect 200 Façade or equal (walls)

Glidvale Protect VP400 or equal (roof)

Glidevale Protect VC Foil Ultra

Nordan NTech 1.2 windows and external doors

Nitesco expanding foam sealant for window installation

 

We will provide:

Structural engineering calculations (applies to kit only so you will also require your own engineer to provide S.E.R.)

Working drawings

Sole plate fixings

All panel and timber fixings

SIP trained site labour
Transformer for 110 volt power tools
Compressor for air tools
All specialist tools and equipment
Sole plate fixings
All panel and timber fixings

Fitting internal walls

Fitting windows and external doors

Fitting external membrane

 

Package excludes:

Fire stops

Finishings

Ceilings

Decking

Delivery (will be charged at cost to client)

Accommodation (charged at cost)
Transport to and from site (charged at cost)
Telescopic fork lift or crane for unloading, distribution, and lifting (charged at cost)
Site welfare
Power
Scaffolding
Skips
Fitting internal membrane (membrane will be fitted behind junctions)
Fitting rooflights
 

Site conditions required:

Site and all roads to the site are to be suitable for use by a 15m trailer and tract or unit. A hardstanding is to be formed on site using blinded hardcore suitable to carry an axle load of 14.00 tonnes for the offloading and storage of panels and insulation. The location and size of this hardstanding will be assessed on an individual basis.

 

A perimeter of 3m around the whole structure base is to be formed using blinded hardcore suitable to carry an axil load of 5.00 tonnes. The site area relating to the erection of the structure is to be clear of all building materials and plant used during the construction of the substructure.  All perimeter foundation trenches are to be filled. There must be sufficient laydown area sufficient for the kit adjacent to the slab. Concrete / block / timber base levelled to within 10mm

 

*

‘Wind and Weathertight’ is an industry standard term denoting a particular stage of the build process. This would usually mean that the kit shell has been erected on the foundation, the windows and doors have been fitted and the roofing and wall membranes have been applied. Your house will still let in water at this stage. No house is truly weathertight until the roofcovering (e.g. slates) and external cladding (e.g. blockwork) have been applied, and all gaps sealed up. It is perfectly normal for windblown rain to drive into the kit at this stage and your own building contractor should take measures to begin sealing up the house as soon as possible after the kit is up

 

Joinery Pack

Gyproc Plain Plasterboard, 1200 x 2400 x 35
Gyproc Wallboard Cream tapered edge, 1200 x 2400 x 12.5
Gyproc Wallboard  Fireline T/E,1200 x 2400 x 12.5
Gyproc Moisture resistant board tapered edge, 1200 x 2400 x 12.5
Isover Acoustic 600x100mm Roll
Premdor SpeedSet Plus Internal Doorset System : Flush fire doors 762 and 838 x 1981
Flush doors 533 x 1981
Internal ironmongery pack
Hillaldam House One sliding door gear
33 x 95 redwood dressed frames
Redwood linings 12 x 45
Redwood facings R2A 12 x 70
Redwood skirtings R1A 12 x 95

Airigh Specification

Ground Floor (optional - will be additional cost)
Ground floor structural beams
DPM For under wallplate only.
'Space' metal web floor joists with appropriate joist hangers
Flooring 200mm SIP panels
Perimeter Soleplate
Edge timbers and fixings

Wall Panels - External
150mm SIP wall panels or equal 150mm thick
OSB full face internally for fit out
OSB full face externally
Panel insulation value of 0.2 W/m2K
Breather Membrane Glidvale Protect 200 Façade or equal
All SIP wall panel fixings
Structural timber posts, beams, and purlins as required

Wall Panels - Internal Load Bearing
150mm SIP load bearing panel If required for structure
Timber stud load bearing panel(s) 38 x 89 mm or 38 x 145 CLS W/W (if required)

Roof
Roof Panels 150mm thick SIP roof panels
Apex Panels As per external walls.
Roofing Membrane Glidvale Protect VP400 or equal
All SIP roof panel fixings
Structural timber posts, beams, and purlins as required
Wall Panels - Internal Non Load Bearing
Top Rail 38 x 89 mm CLS W/W.
Bottom Rail 38 x 89 mm CLS W/W.
Studs 38 x 89 mm CLS W/W regularised @ 600 CTS.
Windows High performance softwood. By NorDan (or equal).
Combination of Tilt and Turn, Reversible and Fixed Lights windows pre-glazed with Low E double glazed units with night vents and lockable handles. Factory paint finish RAL7043
External Doors Main Nordan (or equal) KD “Glazed Door” to suit dimensions shown in drawings. Factory paint finish RAL7043

JOINERY PACK COMPONENTS (SUPPLY ONLY)
Interior Doors Premdor SpeedSet Plus Internal Doorset System FD30 x44mm
FD30 full length glass (no glass supplied)
Calla lever rose satin Chrome 500 Handles/latches and keepers Thumb turn locks for bathroom doors
Satin chrome 100mm butt hinges x 3 per door including screws.
Henderson sliding door gear (as required)
Note: No allowance for intumescent seals & self closers has been made, unless the door is required to be fire rated by building control authority.

Internal Finishings
RW Facings 18 x 45mm plain profile facings.
RW Skirting Boards 12 x 70mm plain profile.
RW Window Cills 10 x 195mm. (no aprons)
Note: Square edged profile skirting and facings.
Plasterboard
External Walls 12.5 mm TE plain. (2400)
Internal Walls 12.5 mm TE plain. (2400)
Ceiling 15 mm TE plain. (2400)
Coomb Ceilings 15 mm TE plain. (2400)
Shower walls 12.5 mm TE moisture resistant. (2400)
Behind stove 12.5mm Fireline T/E Gyproc
Wall Battens
Battens for external wall for vapour barrier 25 x 38 mm SW precut
Sound Proofing
Between internal partitions 50mm Isover Acoustic Roll
Vapour Barrier
External Walls Glidevale VC foil + tape
Coomb Ceilings Glidevale VC Foil + tape

Bathrooms

We provide our bathrooms in a standard range and a premium range and they will be delivered to site at the appropriate stage of the construction programme.  These can be selected through our Build Your Own Home section.
 
 
We use some of the finest fixtures and fittings from manufacturers, including Laufen, Grohe, Matki, Villeroy & Boch.  We also use Keope ceramic tiles that work beautifully with underfloor heating.
 
 
Our interiors consultant will happily talk you through our products and make the final decisions with you on style, tile colour and specification.  Please call today for more information.

Kitchen Pack

We work predominantly with German manufacturer Pronorm, believing that with their product and our designs, our clients will benefits from kitchens with a high level of quality and that are sleek, contemporary and stylish.  We provide our kitchens in a standard range and a premium range and will be delivered to site at the appropriate stage of the construction programme.  These can be selected through our Build Your Own Home section. 
 
Standard
Compactline (contract kitchen only in 600mm deep units)
Laminate inc Insert sink
Neff appliances
Fittings chosen by client

Premium

Proline TU (Matt Laminate 768mm high units with 750mm deep drawers)
Proline LM (Matt Lacquer 768mm High Units with 750mm deep drawers)
Silestone 60mm worktops with under-mount sink
Miele appliances
Fittings chosen by client
 
 
Our interiors consultant will talk you through our product and make the final decisions with you on style, colour, worktop, fittings and appliance specification.

Turnkey

HEBHOMES can now offer a turnkey serviceto all our clients.  Using architects at Dualchas Building Design, a team of experienced consultants, and our affilated contractors, we can take you through the whole project - from start to finish.

Traditional procurement would mean tendering your house after warrant has been approved.  Your agent will then advise which contractor would be used and organise the contract.  Instead of this tendering process we can arrange for one of our affiliated contractors to build your house, giving more cost certainty.
 
A decision on whether you would like a turnkey service is not required until after warrant has been approved.  In some cases the location may make this service inappropriate or our affiliated contractors are unable to undertake the work.  If you are interested in this service it would, however, be best if  you notified us at an early stage so that we can programme your build.